Product Data Sheet Show all documents

Sika® ViscoCrete®-3006 ES

High Performance Superplasticizing Admixture

Sika® ViscoCrete®-3006 ES Imparts very high workability, improved workability retention, allows a large reduction in water content and helps in development of high early strength.

Sika® ViscoCrete®-3006 ES produces a more uniformly cohesive high quality free flowing concrete Sika® ViscoCrete®-3006 ES will result in the following advantages of concrete:
  • Improved dispersion properties
  • Very High Early strength
  • Improved durability
  • Improved cohesion properties
  • Improved rheology
  • Improved flowability
  • Reduced drying shrinkage
  • Improved workability retention
  • Water reduction up to 25-35 % depending on dosage*
  • 28 days strength improved by up to 40 %*
    * This will depend on dosage and mix design
Product Data Sheet Show all documents

Usage

Sika® ViscoCrete®-3006 ES a superplasticizer for free flowing concrete in floors, slabs, foundations, slender components with dense re inforcement, walls and columns and other structural elements. Sika® ViscoCrete®-3006 ES is mainly used for the following types of concrete:       
  • High performance concrete
  • High Early strength concrete
  • Ready mixed concrete
  • Self compacting concrete
  • Precast concrete
  • Pre stressed concrete
  • Pumped concrete
 

Advantages

Sika® ViscoCrete®-3006 ES produces a more uniformly cohesive high quality free flowing concrete Sika® ViscoCrete®-3006 ES will result in the following advantages of concrete:
  • Improved dispersion properties
  • Very High Early strength
  • Improved durability
  • Improved cohesion properties
  • Improved rheology
  • Improved flowability
  • Reduced drying shrinkage
  • Improved workability retention
  • Water reduction up to 25-35 % depending on dosage*
  • 28 days strength improved by up to 40 %*
    * This will depend on dosage and mix design

Packaging

230 kg HDPE carboy

Colour

Light Brown Liquid

Product Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

IS 9103, ASTM C494 Type C,E & F
Product Information

Composition

Aqueous solution of modified poly carboxylate

Shelf life

12 months from date of production if stored properly in undamaged unopened, original sealed packaging.

Storage conditions

Store in dry conditions at temperatures between +10°C and +40°C. Protect from direct sunlight and frost.

Density

~1.10 kg/l at 25°C

pH-Value

≥ 6

 

Total Chloride Ion Content

Nil

Application

Application Information

Compatibility

Sika® ViscoCrete®-3006 ES may be combined with many other Sika®   Products.

Compatible with all types of cements and cementitious materials.

Important: Always conduct trials before combining products in specific mixes and contact our Technical Service Department for information about specific combinations.

DISPENSING

Sika® ViscoCrete®-3006 ES can be added into the mixing water or directly into the concrete mixer after 50 – 70% of the mixing water has been added.

The addition of Sika® ViscoCrete®-3006 ES to dry aggregate or cement is not recommended.

To achieve optimum performance a minimum wet mixing time, which is depending on the mixing conditions and the mixer performance, of 60 seconds is recommended.
Consumption

Recommended Dosage

Standard dosage will vary from 0.5% to 1.5% by weight of cement. Exact dosage rates are dependent on the quality of cement, aggregates,
water/cement ratio and ambient temperature. Therefore, in many cases it is advisable to carry out trial mixes.
Higher dosage may be used if agreed by engineer and consultant.
Stir well before use.

Documents