Product Data Sheet Show all documents

SikaPlast®-3064 NS

Water Reducing High Efficient Plasticizer

SikaPlast®-3064 NS A highly effective high range water reducing agent and plasticizer for free flowing concrete.

SikaPlast®-3064 NS is a powerful plasticiser based on advanced technology which gives the following advantages:
  • High water reduction.
  • Higher strength and density
  • Improved cohesion properties
  • Improved durability
  • Improved water tightness
  • Water reduction up to 20-30 % depending on dosage*
  • 28 days strength improved by up to 30 %*
        * This will depend on dosage and mix design
Product Data Sheet Show all documents

Usage

SikaPlast®-3064 NS a superplasticizer  for free flowing concrete in floor, slabs, foundations, slender components with dense reinforcement, walls, columns, pavements and other structural and non structural elements. Specially recommended for the following types of concrete:
  • High performance concrete
  • Ready mix concrete
  • Site batched concrete
 

Advantages

SikaPlast®-3064 NS is a powerful plasticiser based on advanced technology which gives the following advantages:
  • High water reduction.
  • Higher strength and density
  • Improved cohesion properties
  • Improved durability
  • Improved water tightness
  • Water reduction up to 20-30 % depending on dosage*
  • 28 days strength improved by up to 30 %*
        * This will depend on dosage and mix design

Packaging

230 kg HDPE carboy

Colour

Light Brown Liquid

Product Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

Complies with ASTM C494 - 81 type F & G,   IS 9103
Product Information

Composition

Modified Polycarboxylate

Shelf life

12 months from date of production if stored properly in undamaged unopened, original sealed packaging.

Storage conditions

Store in dry conditions at temperatures between +10°C and +40°C. Protect from direct sunlight and frost.

Density

~1.05 kg/l at 25°C

pH-Value

≥ 6

 

Total Chloride Ion Content

Nil

Application

Application Information

Compatibility

SikaPlast®-3064 NS may be combined with many other Sika® products.

Compatible with all types of cements and cementitious materials.

Important: Always conduct trials before combining products in specific mixes and combinations.

DISPENSING

SikaPlast®-3064 NS can be added into the mixing water or directly into the concrete mixer after 50 – 70% of the mixing water has been added.

The addition of SikaPlast®-3064 NS to dry aggregate or cement is not recommended.

To achieve optimum performance a minimum wet mixing time, which is depending on the mixing conditions and the mixer performance, of 60 seconds is recommended.
Consumption

Recommended Dosage

Standard dosage will vary from 0.5% to 1.5% by weight of cement. Exact dosage rates are dependent on the quality of cement, aggregates, water/cement ratio and ambient temperature. Therefore, in many cases it is advisable to carry out trial mixes.

Higher dosage may be used if agreed by engineer and consultant.

Stir well before use.

Documents