Product Data Sheet Show all documents

SikaPlast®-2035 NS BD

High efficient superplasticizer

SikaPlast®-2035 NS BD is the latest development of superplasticizer for concrete. It meets the requirements for high range water reducing superplasticizers.

SikaPlast®-2035 NS BD is a powerful superplasticizer based on advanced technology which gives the following advantages:
  • Strong water reduction, resulting in high density, high strength and reduced permeability
  • Less sensitive against variations in aggregates and / or different cement types
  • High efficiency even at low dosage rates
  • Extended workability in conjunction with subsequent strength development
  • Superior plasticizing effect, resulting in improved flow, placing and compaction characteristics
  • Chloride free
  • Water reduction up to 22-30% depending on dosage*
  • 28 days strength improved by up to 30%*
* This will depend on dosage and mix design
Product Data Sheet Show all documents

Usage

SikaPlast®-2035 NS BD is a unique multipurpose superplasticizer that is particularly suitable for the production of ready mixed concrete. Additionally it provides high water reduction and improved fresh concrete characteristics. With its outstanding cost / performance SikaPlast®-2035 NS BD is used for the following:
  • A wide range of applications where excellent workability is requested
  • Concrete with high water reduction
  • High efficient concrete applications
 

Advantages

SikaPlast®-2035 NS BD is a powerful superplasticizer based on advanced technology which gives the following advantages:
  • Strong water reduction, resulting in high density, high strength and reduced permeability
  • Less sensitive against variations in aggregates and / or different cement types
  • High efficiency even at low dosage rates
  • Extended workability in conjunction with subsequent strength development
  • Superior plasticizing effect, resulting in improved flow, placing and compaction characteristics
  • Chloride free
  • Water reduction up to 22-30% depending on dosage*
  • 28 days strength improved by up to 30%*
* This will depend on dosage and mix design

Packaging

230 kg HDPE carboy

Colour

Light Brown Liquid

Product Details

Sustainability / Certifications / Approvals

CERTIFICATES AND TEST REPORTS

Complies with IS 9103, ASTM C494 Type G, EN 934-2 T 11.1/11.2
Product Information

Composition

Polycarboxylate Ether (PCE)

Shelf life

12 months from date of production if stored properly in undamaged unopened, original sealed packaging. 

Storage conditions

Store in dry conditions at temperatures between +10°C and +40°C. Protect from direct sunlight and frost.

Density

~1.08 kg/l at 25°C

pH-Value

≥ 6

Total chloride ion content

Nil

Application

Application Information

Dispensing

SikaPlast®-2035 NS BD is added to the gauging water or added with it into the concrete mixer. To take advantage of the high water reduction, a wet mixing time, which is depending on the mixing conditions and mixer performance, of at least 60 seconds is recommended.

To avoid excess water in the concrete, the final dosage must begin only after 2/3 of the wet mixing time.

Compatibility

SikaPlast®-2035 NS BD may be combined with many other Sika® Products.

Compatible with all types of cements and cementitious materials.

Important: Always conduct trials before combining products in specific mixes and contact our Technical Service Department for information about specific combinations.
Consumption

Recommended dosage

Standard dosage will vary from 0.5% to 2.0% by weight of cement. Exact dosage rates are dependent on the quality of cement, aggregates,
water/cement ratio and ambient temperature. Therefore, in many cases it is advisable to carry out trial mixes.
Higher dosage may be used if agreed by engineer and consultant.
Stir well before use.
Application steps

CLEANING

Clean all tools and application equipment with water immediately after use. 

Documents