Product Data Sheet Show all documents

SikaPlast®-4201 NS

High efficient superplasticizer

SikaPlast®-4201 NS is the latest development of superplasticizer for concrete. It meets the requirements for high range water reducing superplasticizers

SikaPlast®-4201 NS is a powerful superplasticizer based on advanced technology which gives the following advantages:
  • Strong water reduction, resulting in high density, high strength and reduced permeability
  • Improved water tightness
  • Less sensitive against variations in aggregates and / or different cement types
  • High efficiency even at low dosage rates
  • Extended workability in conjunction with subsequent strength development
  • Superior plasticizing effect, resulting in improved flow, placing and compaction characteristics
  • Water reduction up to 20-30% depending on dosage*
  • 28 days strength improved by up to 30%*
* This will depend on dosage and mix design
Product Data Sheet Show all documents

Usage

SikaPlast®-4201 NS is a unique multipurpose superplasticizer that is particularly suitable for the production of ready mixed concrete. Additionally it provides high water reduction and improved fresh concrete characteristics. With its outstanding cost / performance SikaPlast®-4201 NS is used for the following:
  • A wide range of applications where excellent workability is required
  • Concrete with high water reduction
  • High efficient concrete applications
  • Variable use in different concrete systems with different raw materials
 

Advantages

SikaPlast®-4201 NS is a powerful superplasticizer based on advanced technology which gives the following advantages:
  • Strong water reduction, resulting in high density, high strength and reduced permeability
  • Improved water tightness
  • Less sensitive against variations in aggregates and / or different cement types
  • High efficiency even at low dosage rates
  • Extended workability in conjunction with subsequent strength development
  • Superior plasticizing effect, resulting in improved flow, placing and compaction characteristics
  • Water reduction up to 20-30% depending on dosage*
  • 28 days strength improved by up to 30%*
* This will depend on dosage and mix design

Packaging

230 kg HDPE carboy

Colour

Light Brown Liquid

Product Details

Sustainability / Certifications / Approvals

APPROVALS / CERTIFICATES

Complies with IS 9103, ASTM C494 Type B, D & G
Product Information

Composition

Modified Polycarboxylate

Shelf life

12 months from date of production if stored properly in undamaged unopened, original sealed packaging

Storage conditions

Store in dry conditions at temperatures between +10°C and +40°C. Protect from direct sunlight and frost.

Density

~1.05 kg/l at 25°C

pH-Value

≥ 6

 

Application

Application Information

Compatibility

SikaPlast®-4201 NS may be combined with many other Sika® Products.

Compatible with all types of cements and cementitious materials.

Important: Always conduct trials before combining products in specific mixes and contact our Technical Service Department for information about specific combinations.

DISPENSING

SikaPlast®-4201 NS can be added into the mixing water or directly into the concrete mixer after 50 – 70% of the mixing water has been added.

The addition of SikaPlast®-4201 NS to dry aggregate or cement is not recommended.

To achieve optimum performance a minimum wet mixing time, which is depending on the mixing conditions and the mixer performance, of 60 seconds is recommended.
Consumption

Recommended Dosage

Standard dosage will vary from 0.5% to 1.5% by weight of cement. Exact dosage rates are dependent on the quality of cement, aggregates,
water/cement ratio and ambient temperature. Therefore, in many cases it is advisable to carry out trial mixes.
Higher dosage may be used if agreed by engineer and consultant.
Stir well before use.

Documents